4. Installation Procedures
RuggedMAX™
21
Installation Guide Rev 1.0
Figure 4.10. Attaching the Mounting Bracket
2. Secure the bracket to the base station unit with the four screws and washers (supplied).
4.4.4. Mounting the Base Station: Wall Mount
The base station can be attached to any wall that can support the load of the unit.
Plan the installation so that the interface connections face down, providing more
protection against the elements.
Follow these step to mount the base station on a wall.
Procedure 4.4. Wall-mounting the Base Station
1. Determine the location of the base station mounting bracket. Mark the mounting holes on
the wall surface based on the bracket’s four outer mounting holes, two at the top and two
at the bottom.
