4. Installation Procedures
RuggedMAX™
22
Installation Guide Rev 1.0
Figure 4.11. Base Station and Wall Mounting Bracket: Rear View
2. Drill four holes in the wall. If required, insert wall anchors (not supplied) in the wall. Align the
bracket installation holes with the holes in the wall. Secure with the appropriate screws and
washers (not supplied).
4.4.5. Mounting the Base Station: Pole Mount
The unit can be attached to any pipe or pole with a 1.75" to 10" diameter.
Plan the installation so that the interface connections face down, providing more
protection against the elements.
Follow these steps to mount the base station on a pole.
Procedure 4.5. Pole-mounting the Base Station
1. Assemble the wall-mounting bracket to the ribbed side of the unit.
2. Insert the metal bands in the bracket slots, as shown below.
