SmartAlarm Instruction Manual Rev 2
Page 57 of 115
Local Pushbuttons
Each SmartAlarm is equipped with four integral tactile pushbuttons used to
control the operational sequence of the annunciator. The local pushbuttons
tab allows the user to change the function of a pushbutton if required.
A drop-down menu provided per pushbutton allows the user to select
alternative functions. For example System Test is used as standard but the
user may prefer Lamp Test as an option.
Once the alternative function has been selected the user will need to press
“Confirm” and the changes will need to be downloaded to the annunciator via
the tools menu.
Any internal pushbutton can be assigned to a pushbutton group and any
channel can be set to match the associated group.
For example:-
Channel-1 to 4 can be set to Pushbutton Group-1 and the
internal pushbuttons can be set to control Pushbutton Group-1. Only alarms
within the group would be controlled by the internal pushbuttons.
The remaining alarms can be assigned to Pushbutton Group-2 and these can
be controlled by external pushbuttons if required.
