SmartAlarm Instruction Manual Rev 2
Page 73 of 115
SECTION 17
– INDIVIDUAL CHANNEL SETTINGS
Configuring Individual Channels
To configure individual channels the user must first select an LED on the
associated annunciator faceplate using a left mouse click as typically shown
below for channel-1.
Configuring Selective channels
Selective channels
can be highlighted if the “Ctrl” key on the keyboard is held
down while you select the required LED icons (Channels). Once the channels
have been selected the user is able to navigate between features and select
them as required. The background colour for a selected feature is white
however if the background colour changes to blue it indicates that the
selected channels currently have varying settings stored and the user will be
prompted if they wish to proceed in setting them to the same function.
Configuring Multiple channels
Multiple channels can be highlighted if the user selects the first LED and holds
down the shift
–key on the keyboard to select the last LED in the group. For
example if you select channel-1 and hold down the shift-key and select
channel-8 all channels within the range will be selected.
To implement changes the user must
select the “Confirm” icon and download
the configuration to the SmartAlarm using the
“Tools” menu – “Send Settings”
as required
