System 9000TS
111
Possible cause:-
Input/Output/Relay card is faulty.
Solution:-
If you have tried all of the above solutions without success then contact RTK for advice and
possible card replacement.
Sustained printer watchdog fault
Refer to trouble shooting heading – “Sustained watchdog relay fault”
Intermittent printer watchdog fault
Refer to trouble shooting heading – “Intermittent watchdog relay fault”
Sustained AMS watchdog fault
Refer to trouble shooting heading – “Sustained watchdog relay fault”
Intermittent AMS watchdog fault
Refer to trouble shooting heading – “Intermittent watchdog relay fault”
Unable to clear status event
Possible cause:-
9000TS system structure has been modified causing a status value to be allocated against
a card which no longer exists in the system structure. A default status value cannot be
cleared in the normal way if the card that created the record no longer exists in the system
structure.
Solution:-
Restore the original 9000TS system structure using the configuration software or remove
and refit the interface card battery; this will clear all records including outstanding events.
Interface card status led not illuminated / flashing
Possible cause:-
System initialising.
Solution:-
Please wait up to 3 minutes for system to start.
Possible cause:-
Power fault.
Solution:-
Check all power supply levels and connections.
Possible cause:-
Interface card fault.
Solution:-
If you have tried all of the above solutions without success then contact RTK for advice and
possible card replacement.
