40
Printer Failure Alarm
System relays RL3 - RL8 can be software configured to operate in the event of a
printer failure alarm being received by the 9000TS System.
Time Sync. Failure
System relays RL3 - RL8 can be software configured to operate in the event of a time
sync. error signal being generated by the 9000TS System
Buffer Overload Alarm
System relays RL3 - RL8 can be software configured to operate in the event of a
buffer overload signal being generated by the 9000TS System
Watchdog Relay:- WD
RL9 is factory set as a watchdog relay
The relay is normally de-energised and will energise if the system detects a fault. The
relay will automatically reset when the fault condition has been removed. The coil state
can be changed from normally DE-EN to normally EN using Link LK6 and the contact
state can be set to N/O or N/C using Link LK8 as required.
Customer terminals are available on the rear of the rack as shown in the diagram
below.
A
B
A
B
1
X1
X2
F2
F1
CRITICAL
HORN [HN1]
NON-CRITICAL
HORN [HN2]
POWER
FAILURE
COMM'S
FAIL
SYNC.
FAILURE
PRINTER
FAILURE
RL1-1
RL2-1
RL3-1
RL4-1
RL5-1
RL6-1
RL7-1
RL8-1
RECEIVE
TRANSMIT
SYNC. I/P
WATCHDOG [WD]
MASTER / SLAVE
LOGIC SUPPLY 5 AMP
SIGNAL SUPPLY 1 AMP
OPTIONAL EXTERNAL
AUDIBLE ALARMS
2
3
4
5
6
7
8
9
RL9-1
5
4
3
2
1
6
7
8
COMMON ALARM GROUP [GP1]
COMMON ALARM GROUP [GP2]