rtd cpuModule CMC6686GX, User Manual

Page: 84 / 118

83
FLOPPY DISK(S) fail (80) Æ Unable to reset floppy subsystem.
FLOPPY DISK(S) fail (40) Æ Floppy Type mismatch.
Hard Disk(s) fail (80) Æ HDD reset failed
Hard Disk(s) fail (40) Æ HDD controller diagnostics failed.
Hard Disk(s) fail (20) Æ HDD initialization error.
Hard Disk(s) fail (10) Æ Unable to calibrate fixed disk.
Hard Disk(s) fail (08) Æ Sector Verify failed.
Keyboard error or no keyboard present.
Cannot initialize the keyboard. Make sure the keyboard is attached correctly and no keys are being
pressed during the boot.
Manufacturing POST loop.
BIOS ROM checksum error - System halted.
The checksum of ROM address F0000H-FFFFFH is bad.
Memory test fail.
BIOS reports the memory test fail if the onboard memory is tested error.
RTD Enhanced Award BIOS POST Codes
POST (hex) Description
01 Clear base memory 0~640K
02 Reserved
03 Initialize EISA registers (EISA BIOS only)
04 Reserved
05 1. Keyboard Controller Self-Test
2. Enable Keyboard Interface
06 Reserved
07 Verifies CMOS's basic R/W functionality
09 1. Program the configuration register of Cyrix CPU according to the MODBINable
Cyrix Register Table
2. OEM specific cache initialization (if needed)