63
BIOS Features Setup
The following is a list of BIOS Features Setup fields.
BIOS Features Setup Fields
Field
Active keys
Selections
Virus warning
+, -, <PgUp>,
<PgDn>
Enable or disable virus warning
•
Enable -- Warn if boot sector or partition table
is being modified
•
Disable -- Allow boot sector or partition table
modification
CPU Internal
Cache
+, -, <PgUp>,
<PgDn>
Enable or disable CPU internal cache
•
Enable -- Enable CPU internal 16 KB cache
•
Disable -- Disable CPU internal 16 KB cache
Quick power on
self test
+, -, <PgUp>,
<PgDn>
Enable or disable quick boot
•
Enable -- Skip or shorten some tests to allow
the system to boot faster
•
Disable -- Perform all power on self tests
Boot Sequence
+, -, <PgUp>,
<PgDn>
Select from the options the boot sequence for the
CPU
Swap floppy drive
+, -, <PgUp>,
<PgDn>
Swap floppy drive A: and B:
•
Enable -- Floppy connected after the twist in
the floppy wire will be Drive B: and floppy
connected before the twist in the floppy wire
will be Drive A:
•
Disable (Normal) -- Floppy connected after the
twist in the floppy wire will be Drive A: and
floppy connected after the twist in the floppy
wire will be Drive B:
Note: This only works with two floppies installed.
Boot up floppy
seek
+, -, <PgUp>,
<PgDn>
Perform floppy seek to determine if floppy is a 40
tracks 360 KB or an 80 track 1.2 MB, 720 KB or
1.44 MB
•
Enable -- Perform check
•
Disable -- Skip check
Boot up numlock
status
+, -, <PgUp>,
<PgDn>
Set keypad numlock status after boot
•
On -- Keypad is number keys
•
Off -- Keypad is cursors keys
Gate A20 option
+, -, <PgUp>,
<PgDn>
Select gate A20 options
•
Normal -- Use keyboard controller to control
A20 gate
•
Fast -- Allow chipset to control A20 gate
Typematic rate set-
ting
+, -, <PgUp>,
<PgDn>
Determines if typematic is to be used
•
Enable -- Enable typematic rate
•
Disable -- Disable typematic rate
Summary of Contents for cpuModule CMC6686GX
