RTA 460PSUSB-N70U Product User Manual Download Page 73

Page: 73 / 76

Last Message Sent:

-Last Complete Message the gateway received from the ASCII device, processed, and sent to the

other protocol

Next Message to Send from Queue:

-This is the Next Complete Message that the gateway has already received and processed from

the ASCII device, and will be sent next to the other protocol

Current Message being Received from ASCII:

-The Current data that the gateway is receiving

-Need to hit one of the three end cases to call a message complete

1. Max Message Length (max number of characters to receive)

2. Receive Character Timeout (max time to wait after a character to call the current message

complete)

3. Delimiters (gateway has not received the delimiters that are specified)

Last Message Sent to ASCII:

-Last Message that the gateway sent to the ASCII device

Note: The concatenated delimiters are not displayed in this message but will be transmitted

with the message

Send Data from Gateway to ASCII (Used for Testing Only):

-Enter a message to send to your ASCII device

-Can be used to test communication and test formatting of messages

Real Time Automation, Inc.

1-800-249-1612

Summary of Contents for 460PSUSB-N70U













































































Search results

Summary of Contents for 460PSUSB-N70U

Reviews:

Related manuals for 460PSUSB-N70U

Brands by name

Popular brands

RTA 460PSUSB-N70U, Product User Manual

Search results

Summary of Contents for 460PSUSB-N70U

Reviews:

Related manuals for 460PSUSB-N70U

Brands by name

Popular brands