Real Time Automation, Inc.
17
1-800-249-1612
Modbus TCP/IP Client Configuration
Click the
Modbus TCP/IP Client
button to access the configuration page.
1)
Select which
Network Interface
to use for this Modbus TCP/IP connection. If using single port
hardware, the Network Interface will default to Ethernet port only.
2)
Delay Between Messages
: Enter the length of time to delay between read and write scan line
requests (ms).
3)
Response Timeout
: Enter the amount of time the gateway should wait before a timeout is
issued for a read/write request (ms).
4)
Delay Between Connect Attempts
: Enter the amount of time the gateway should wait between
attempts to connect to the PLC.
5)
Dependency Protocol
: If enabled, Modbus TCP/IP communication will stop if communication to
the selected protocol is lost.
