RSS RSS-059 User And Programming Manual Download Page 9

Page: 9 / 46

ESET

PERATIONS

The Cash Register has the option to perform four types of reset. Proceed carefully, because

you could lose all the data.

Partial Reset

The partial reset is used to clear the actual working memory. It can be used when the

Press and hold the key

until it appears a 0 on the display.

Then, entry the next:

1 1 1

It will be printed the message RESET D.

Full Reports Reset

The full reports reset is used to clear the sales counters and reset to zero the receipt

number. After this procedure the register is ready for programming and operation.
Turn the key to the OFF position.

Press and hold the key

until it appears a 0 on the display.

Then, entry the next:

3 3 3

It will be printed the message RESET C.

Full Reset of All Data

This reset leaves the register in the default status preset by factory. All programming data is

lost and the cash register has to be programmed again. We recommend never to use this

reset unless it is recommended by the technical service.

Turn the key to the OFF position.

Press and hold the key

until it appears a 0 on the display.

Then, entry the next:

9 9 9

It will be printed the message RESET A.

This reset also requires the programming of date and time.

Summary of Contents for RSS-059















































Search results

Summary of Contents for RSS-059

Reviews:

Related manuals for RSS-059

Brands by name

Popular brands

RSS RSS-059, User And Programming Manual

Search results

Summary of Contents for RSS-059

Reviews:

Related manuals for RSS-059

Brands by name

Popular brands