O
PERATIONS
C
LERK
N
UMBER
Clerk codes has a special security feature to control access to the register which can be
programmed in the register memory as individual code. When clerk system is activated,
Clerk code must be assigned before operating in RECEIPT or JOURNAL mode.
The entered clerk code stays until LOG-OFF operation even if any operation is performed in
other modes such as PRG, X or Z.
Select Clerk 1
1 Clerk
Display shows:
Security code can be programmed and entered in 3 digits number after clerk number. If
wrong security code was entered with clerk code, the register shows error with beep sound.
Select Clerk 1 with code 234
1 Clerk 234 Check
Display shows:
1
1
1
LOG-OFF operation: Clerk number entry will be required for next operation once Log-Off
operation was performed.
To log-off enter Clerk 9
9 Clerk
