manualshive.com logo in svg

RSS M-380, Owner'S Manual

Share
Download
RSS M-380 Owner'S Manual Download Page 173

 

173

Other settings and functions

 

Other settings and functions

 

You can use USB memory to save or load mixer settings as a project 
file. The LOAD/SAVE popup of the SYSTEM screen is used to save 
or load mixer settings.

 

fig.ScrSysLoadSaveGuide.eps

 

1.

 

Project file list

 

This lists the project file that are saved in USB memory.

 

2.

 

LOAD SECTION select buttons

 

Use these buttons to select the section(s) for which you want to 
load mixer settings.

You can select the following sections.

 

The libraries that can be selected by the LOAD SECTION select 
buttons are USER libraries.

In the LOAD/SAVE popup, the function buttons perform the 
following operations.

 

1.

 

In the SETUP section, press [SYSTEM].

 

fig.ScrSystem.eps

 

The SYSTEM screen will appear.

 

2.

 

Press [F3 (LOAD/SAVE)].

 

fig.ScrSysLoadSave.eps

 

The LOAD/SAVE popup will appear.

 

3.

 

Press [F2 (SAVE)].

 

The PROJECT  SAVE popup will appear.

 

4.

 

Use the name edit field to edit the name of the project files. 

 

For details on name editing, refer to “Editing a name” (p. 39).

 

Saving and loading mixer 

settings

 

LOAD/SAVE popup

 

MIXER PARAMETER

Mixer parameters

SYSTEM SETTING

System settings

SCENE MEMORY

Scene memories

IN PATCH LIBRARY

Input patchbay library

OUT PATCH LIBRARY

Output patchbay library

CH LIBRARY

Channel library

AUX/MAIN LIBRARY

AUX/MAIN library

GATE LIBRARY

Gate/Expander library

COMP LIBRARY

Compressor library

LIMITER LIBRARY

Limiter library

EQ LIBRARY

EQ library

FX LIBRARY

Effect library

GEQ LIBRARY

GEQ library

M-48 LIBRARY

M-48 Library

USER PREFERENCE

User preference

1

2

 

[F1 (LOAD)]

Loads the project file that is select-
ed in the list.

p. 174

[F2 (SAVE)]

Saves the current mixer settings as 
a project file to USB memory.

p. 173

[F3 (NAME EDIT)]

Opens the NAME EDIT popup 
where you can edit the name of the 
project file selected in the list.

p. 174

[F4 (DELETE)]

Deletes the project file that is se-
lected in the list.

p. 175

[F8 (CLOSE)]

Closes the popup.

 

Saving mixer settings to USB 

memory

M-380_e1.book 173 ページ ２０１０年６月３０日　水曜日　午前１０時３１分

Summary of Contents for M-380























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands