manualshive.com logo in svg

RSS M-380, Owner'S Manual

Share
Download
RSS M-380 Owner'S Manual Download Page 39

 

39

Basic operation

 

Basic operation

 

You’ll use the NAME EDIT popup to edit names.

Here we’ll explain operations that are common to the NAME EDIT 
popup.

 

fig.ScrNameEditGuide.eps

 

1.

 

Name edit field

 

You can edit the name in this field.

The buttons and dial will have the following functions in the 
name edit field.

 

There are limitations on the number of characters you can use in 
a name. The maximum number of characters will depend on the 
screen or popup that uses the NAME EDIT popup.

 

If an INSERT operation causes the name to exceed the 
maximum number of characters, the excess will be deleted.

Library operations are performed in the LIBRARY popups.

LIBRARY popups include the following.

Here we’ll explain operations that are common to these LIBRARY 
popups.

 

fig.ScrLibGuide.eps

 

1.

 

Applicable channel/effect indication

 

This shows the channel or effect to which the library operation 
will apply.

 

2.

 

Library data list

 

This lists the library data.

The function buttons have the following operations in a 
LIBRARY popup.

* Available only for the User library.

 

Editing a name

 

Operations in the NAME EDIT popup

 

Button/Dial

Function

 

Left/right buttons

Move the cursor location.

Value dial

Changes the character at the cursor loca-
tion

[F1 (INSERT)]

Inserts a space at the cursor location. The 
text at the right of the cursor location will 
move to the right.

[F2 (A/a)]

Changes the letter at the cursor location 
between uppercase and lowercase. If the 
character is not an English letter, it will be 
changed to the letter “A.”

[F3 (NUM)]

Converts the character at the cursor loca-
tion to the numeral “0.”

[F4 (DELETE)]

Deletes the character at the cursor location. 
The text at the right of the cursor location 
will move to the left.

[F7 (CANCEL)]

Cancels any changes and closes the popup.

[F8 (OK)]

Confirms the changes and closes the pop-
up.

1

 

Library operations

 

Type

See page

 

CH LIBRARY

p. 53

GATE/EXP LIBRARY

p. 77

COMP LIBRARY

p. 81

LIMITER LIBRARY

p. 83

EQ LIBRARY 

p. 86

FX LIBRARY

p. 102

GEQ LIBRARY

p. 109

INPUT PATCHBAY LIBRARY

p. 92

OUTPUT PATCHBAY LIBRARY

p. 93

M-48 LIBRARY

p. 203

 

LIBRARY popup

 

[F1 (PRESET)]

Displays the recall-only PRESET library.

[F2 (USER)]

Displays the USER library in which you 
can store data or recall it.

[F4 (RECALL)]

Recalls the selected library data and closes 
the popup.

[F5 (STORE)]*

Stores the current settings into the selected 
library data and closes the popup.

[F6 (LOCK)]*

Locks the selected USER library data.

[F7 (NAME EDIT)]*

Accesses a NAME EDIT popup for you to 
edit the name of the selected user library 
data.

[F8 (CLOSE)]

Closes the popup.

1

2

M-380_e1.book 39 ページ ２０１０年６月３０日　水曜日　午前１０時３１分

Summary of Contents for M-380























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands