manualshive.com logo in svg

RSS M-380, Owner'S Manual

Share
Download
RSS M-380 Owner'S Manual Download Page 118

 

118

Mute groups

 

Mute groups

 

3.

 

Move the cursor to the desired channel select button, and 
press [ENTER] to select it.

 

4.

 

Press [F8 (CLOSE)] to close the popup.

 

When the MUTE GROUP ASSIGN popup is displayed, you can 
press a top panel [SEL] to turn on/off the corresponding 
channel’s assignment to the mute group. 

 

1.

 

Access the MUTE GROUP screen.

 

fig.ScrMUTEGroup.eps

 

2.

 

Move the cursor to the desired mute group button, and 
press [ENTER] to turn it on/off.

 

You can also make the setting for switching MUTE groups on or 
off from a USER button (p. 154).

You can specify a name and color label for each mute group. A name 
of up to six characters can be specified, and you can choose one of 
eight colors as the color label.

The NAME EDIT popup is used to edit the name and select a color 
label.

 

For details on name editing, refer to “Specifying a channel name 
and color label” (p. 51).

 

1.

 

Access the MUTE GROUP screen.

 

fig.ScrMUTEGroup.eps

 

2.

 

Move the cursor to the MUTE group button of the desired 
mute group, and press [F7 (NAME EDIT)].

 

fig.ScrChNameEdit.eps

 

The NAME EDIT popup will appear.

[F1 (CH 1–24)]

Displays CH1–CH24 as the 
channel select buttons.

[F2 (CH 25–48)]

Displays CH25–CH48 as the 
channel select buttons.

[F3 (AUX/MAIN/MARIX)]

Displays AUX1–AUX16, 
MATRIX1–MATRIX8, 
MAIN L/R and MAIN C as 
the channel select buttons.

[F8 (CLOSE)]

Closes the popup.

 

Using mute groups

 

Specifying a name and 

color label for a mute group

 

Accessing the NAME EDIT popup

M-380_e1.book 118 ページ ２０１０年６月３０日　水曜日　午前１０時３１分

Summary of Contents for M-380























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands