2
WARNING
▪
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
▪
To reduce the risk of fire or electric shock, and annoying interference, use the recommended accessories
only.
▪
This device is intended for continuous operation.
CAUTION
▪
This appliance is a class laser product. However this player uses a visible laser beam, which could cause
hazardous radiation exposure if directed. Be sure to operate the player correctly as instructed.
▪
When this player is plugged to the wall outlet. do not place your eyes close to the opening of the disc tray
and other openings to look into the inside of this player.
▪
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
▪
To prevent risk of electric shock, do not remove cover.
▪
No user serviceable parts inside.
▪
Dripping or splashing can damage the unit, and no objects filled with liquids, such as vases etc, shall be
placed on the apparatus.
CARE AND SAFETY INSTRUCTION
Cleaning the Unit
Vacuum dusts away from ventilation slots.
Clean the panel, controls and cabinet with a soft cloth lightly moistened with
mild detergent solution or water.
Do not use any abrasive materials or solvents such as benzene and alcohol.
Care of Discs
Keep the disc clean and keep the disc away from heat of direct sunlight
Do not touch the playing surface (unprinted side).
Do not use cracked, heavily scratched, or warped disc.
Always store disc in it’s case after playing.
Cleaning the Disc
Clean the disc with soft cloth from the center out.
Do not use solvents such as benzene or alcohol.
Power supply voltage
Check that the operating voltage (AC 100V ~ 250V 50/60Hz) indicated on the type plate is identical to the
voltage of your local power supply. If not, please consult your dealer.
Power consumption
When the system is switched to Standby mode, it is still consuming power. To disconnect the system from
the power supply completely, remove the AC power plug from the wall jack.
Avoid high temperatures, moisture, water and dust
Do not expose the player, batteries or discs to humidity, rain, sand or excessive heat. (caused by heating
equipment or direct sunlight.)
Avoid condensation problem
The lens may cloud over when the player is suddenly moved from cold to warm surroundings, making it
impossible to play a disc. Leave the player in the warm environment until the moisture evaporates.
Do not block the vents
Do not operate the DVD Player in an enclosed cabinet, allow about 10 cm (4 inches) of free space all
around the player for adequate ventilation.
Do not stack anything on top of the Player
Do not stack anything on top of the player. it will makes top cover to touch the disc or DVD loader.
