Documenting Multifunction Calibrator / EN
06/04/2018 Version No. 1
29
9. Temperature Input (Measure)
9a. TC Simulating Thermocouple Signals
(for Types K, J, E, T, R, S, N, L, U, B, C, and mV Input)
(1) Turn on the power. Turn sliding switch to
℃
℉
mV.
(2) Press
button to select MEASURE (input) mode.
(3) Select a TC TYPE in the SETUP display.
(4) Connect Thermocouple to TC/mV terminals.
(5) Then connect the other end of Thermocouple to the object for measurement.
(6) The calibrator display will show the temperature of the tested object.
Remark: 1.
The measurement result is 5-digit (including decimal point and
negative sign).
Warning:
1.
The Input TC terminals is for measuring mV, do not measure over 30V for
MEASURE (terminals) to prevent from damaging the calibrator.
2.
Perform one function at a time and make connection to the specific
terminals only. Remove all other connections to the unused terminals.
Always connect to only one of SOURCE , MEASURE , or TC alone.