Documenting Multifunction Calibrator / EN
14
06/04/2018 Version No. 1
2d. MAPPING Function
(1) In the SETUP display when users choose YES for MAPPING, the MAPPING
function is enabled
(2) The display unit will be the same as the one set up by users. For example,
for the unit
“KW” users should type in “75” and “87”.
(3) (If in the SETUP display, users set up 0KW for 4mA and 100KW for 20mA)
When users type in 100 and then press ENTER, the display will show:
100.0KW
(the main display) and
20.000mA
(which means the original output of
the calibrator is 20.000mA).
(4) When users perform scanning function, the display show 0~100KW instead of
4mA ~ 20mA.