PARTICLE COUNTER / EN
09/15/17 Version No. 00
17
To collect samples:
1. Press the
(POWER) key to turn on the meter.
2. If needed, select the required setting on the setup screen. Press
F2
(SETUP) key, than select the required settings on the setup Page 1
screen.
3. Press
F2
(Page 2) key to select the required settings on the setup
Page 2 screen.
4. Press
(RETURN) key to return to the Main screen.
5. Use
F1
(Count) on the Main screen to start sampling. The cycle will
automatically stop on completion of the sample. If the Sample Volume
is set to Manual, the meter will continuously samples until the
F1
(Stop) key is pressed.
7-2-3 Transfer sample data to PC:
To transfer sample data from the meter to a PC:
1. Connect USB cable to PC and the meter.
2. Power on the PC, until the PC into the Window screen then press the
(POWER) key to turn on the meter.
7-2-4 Storing samples data:
The meter stores each sample data in a 500-record rotating buffer. Data
is stored in a “first in, first out” order. Thus, when the 501st record is
saved, the first record is automatically deleted, leaving a total of 500
records.
7-2-5 Review the buffer:
To review the buffer:
1. Press
F3
(LABEL) key on the Main screen. The Label Menu screen is
displayed.