PARTICLE COUNTER / EN
14
09/15/17 Version No. 00
7-1-7 Setting the date and time:
To set the date and time:
1. Press
F2
(SETUP) key on the Main screen. The Setup Page 1 screen
is displayed.
2. Press
F2
(PAGE 2) key on the Setup Page 1 screen. The Setup Page
2 screen is displayed.
3. Press
or
key to move the cursor to “Date” or “Time” field.
4. Press
F1
(PROGRAM) key to enter the edit mode. Once in this mode,
press
and
keys to increase or decrease the selected entry.
5. Use
F1
(left arrow) and
F3
(right arrow) to change the entry
selected.
6. Once the correct data has been entered, press
F2
(SAVE) key to
store the data.
7. Press
(RETURN) key to return to the Main screen.
7-1-8 Setting a delay between samples:
If continuous sampling is not necessary, a delay can be set. The delay timer
allows a “time out” between automatic samplings.
To set a delay time:
1. Press
F2
(SETUP) key on the Main screen. The Setup Page 1 screen
is displayed.
2. Press
F2
(PAGE 2) key on the setup Page 1 screen. The Setup Page
2 screen is displayed.
3. Press
key to move the cursor to “Delay” field.
4. Press
F1
(PROGRAM) key to enter the edit mode.
5. Use
F1
(left arrow) and
F3
(right arrow) key to move to the desired
unit of time (hours, minutes, or seconds).
