PARTICLE COUNTER / EN
09/15/17 Version No. 00
15
6. Press
to increase the time; press
to decrease the time.
7. Once the desired time has been selected, press
F2
(SAVE) key.
8. Press
(RETURN) key to return to the Main screen.
Note: The maximum delay time is 23:59:59.
7-1-9 Setting the temperature unit:
To set the Temperature unit to ° F or ° C:
1. Press
F2
(SETUP) key on the Main screen. The Setup Page 1 screen
is displayed.
2. Press
F2
(PAGE 2) key on the setup Page 1 screen. The Setup Page
2 screen is displayed.
3. Press
or
key to move the cursor to “Temperature”.
2. Use
F1
(left arrow) or
F3
(right arrow) key to select “°F” or “°C”.
3. Press
(RETURN) key to save the choice and return to the Main
screen.
7-2 Counter Operation
Once the meter configuration is set:
Use the zero count filter to purging the meter
Collect the air samples
Transfer the data from the air sample to PC for further analysis
Review the number of samples in the buffer
Clear the buffer if necessary
