29
RS Biotech
User Guide
6.
Wipe down the inside of the chamber with the alcohol/ water solution, and leave
it to dry completely.
CAUTION!
Never
use any of the following substances to clean the stainless steel,
or damage will result: Sodium Azide, Aqua Regia, Iodine, Ferric Chloride
or
Sulphuric
Acid.
7.
Wipe the internal components of the chamber twice with the alcohol/water
solution. Wipe off excess liquid and leave it to dry completely.
8.
Re-assemble the shelf racks, the humidity tray and the shelves, before switching
the incubator on.
9.
Be sure to remove the protective cover from the sensor and put it back in the
holder for safekeeping.
10.
Refill the humidity tray (
as explained in Section 3.3
).
11.
Leave the incubator on for at least two hours (preferably overnight) to allow
conditions to stabilise.
