6
RADEX
AIRLINE FILTER
A GX4
®
Gas Monitor, Part No. 08-400, is recommended to monitor Carbon Monoxide,
Oxygen, and Hydrogen Sulfide.
(Other gas sensors may become available in the future.)
This can help a system comply with OSHA regulation 1910.134(i)(7), EN 12021, and AS/NZS
1715.
BREATHING AIR PRESSURE
The air pressure must be continually monitored at the point of attachment. Air pressure
must be read from a reliable pressure gauge, while the respirator has air flowing through it,
as required by applicable standards and regulations. Refer to the instruction manual for the
respirator for the Breathing Air Pressure Table to determine the correct air pressure settings
for your setup.
The air pressure supplied to the Radex
®
Airline Filter should not
exceed 125 psi (8.6 Bar). Exceeding this air pressure could cause the
regulator to not allow enough air into the unit to work properly or cause the unit to explode.
AIR SOURCE, FITTINGS, AND PRESSURE
CONTINUED
WARNING
