6
1. Open the fly-case, and discover the inside plastic bag.
2. High-lift the product by two handles beside the bottom base and move it out.
3. Before power on, make sure you have opened the X, Y axis lock!
4. INSTALL STRANDARD
4.1 INSTALL LOCK
B230 can be placed on the stage, or mounted in an arbitrary direction of the
truss. Two fast locks system could fix the item easily
4.2 EQUIPMENT FIXED
1.Before installation must verify the fast lock is keep in good state,
and can withstand at least 10 times the weight of product. Verify that
the building can withstand at least 10 times of the total weight of the
product and accessory equipment.
2. Fix the hang fixture into the hole, which located on the base of the price.
Seize handle of fasteners, clockwise rotate 1/4 turn and lock.
Installed other one fastener in the same method.
3. Using the safety cable which can withstand 10 times the weight of
the equipment.
4. Make sure the X,Y protect locks are opened, Verify that within 3
meters there is no combustibles .
WARNING
Fixture must use two fixing devices, and make sure the fixing device
have locked! And only fully clockwise rotate 90 ° can lock the hang
fixture! Do remember plus a safety rope, and do not connect the safety
Rope to plastic handle. It should be connect to the hole on the base!
4.3 FIXTURE CONNECT
Attention! One product only can accept one input one output.
B230 DMX cable include 3 contact pins:
Pin 1, FOR GROUND; Pin 2 connected to the negative polarity
signal; The pin 3connected to the positive polarity signal.
DMX512 cable must use the professional shielded twisted pair
cable; standard loudspeaker cable is not reliable to control the
long-range data. 24AWG cable is suitable for more than 300
meters long-distance signal transmission and must add\ DMX 512
signal amplifier.