4
in other facilities will need to verify before installation. Installing or
removing the equipment, to make the pulley below the work location
2.4 UA PROTECTION AND THE BULB EXPLOSION
Prohibit straight viewpoint with exposed bulbs to avoid UV damage
to the eyes;
Do not use the equipment without the lens screen and the lid;
The lens and the light head covers should be timely replaced if any
damage to rupture;
The Fixture should be used with the protection screen together.
2.5 PREVENTION OF ELECTIC SHOCK
The electrical connection must only be carried out with corresponding
qualifications;
Before installing, make sure you use the power voltage lamps must comply
with the identified power, voltage and have an overload or leakage protection;
Each lamp must be properly grounded, installed in accordance with the
relevant standards;
Cut off the power when stall or replace the lamp and the fuse;
Prohibit the use of a lightning storm or wet environment.
2.6 TO PREVENT BURNING OR FIRE
1. The fixture can be mounted directly on the surface of ordinary
combustible material.
2. Do not short-circuit temperature protection switch or fuse, use the
specified type of fuse.
3. The equipment must be installed away from inflammable and explosive materials.
4. The equipment should be projected range of 3 meters away objects and
projectiles temperature less than 60 ° C; ---- 3.0 m.
5. Fan or ventilation, at least in the range of 0.5 meters can not be an
obstacle.
6. Do not place any object on the lens.
7. Handling at least allow the device to cool for 20 minutes.
