8
WARNING!
There is a safety hazard or damage if install similar bulb
To reduce the risk of damage to light,do change the lamp
before using time over 125% of lamp life.
6.2 LAMP REPLACE
Attention! When replace the lamp is forbidden to touch lamp with bare hand, to
avoid the greasy dirt stains filament.Filament must be kept clean.
1. Disconnect the power. Before replace lamp, fixture need 20 minutes for lamp
cooling. Fasten the head with Y axis protect lock in 60 ° position.
2. Use cross screwdriver to open the light body cover, remove the fan bracket, pull
out the bulb cable
3. Open stainless steel tablet holder with one hand and the use other hand to pull out
the bulb at oblique 15 °
4. Install the lamp
6.
CONTROL PANEL(DISPLAY)
LCD Touch Display
Rotating Button
