5
8. Do not replace the non-original parts.
3. PACKAGE
3.1 ATTACHMENT
Beam230 packed with fly-case of one in one ,two in one ,or carton box.
ACCESSORY
CONTENT
QUANTITY
USER MANUL
1
CLAMP BRACKET
2
SIGNAL CABLE
1
PACAKGE SIZE
CARTON BOX
46x44x57cm
Flight-Case 2 in 1
83x47x71cm
3.2 TRANSPORT PROTECT LOCK
In order to protect the light, there is a protect lock; During the transport , the
lock will closed keeping the item in safety state.
3.3 ABOUT PACK STAGE
1. Before packed, make sure power is off, and wait for at least 20mins for
cooling down.
2. Before clean the fixture, make sure X, Y axis protect lock closed.
3. After packed by plastic bag, high-lift the fixture with two handles
besides the product. put the product into the fly-case up-side-down.
4. After packed the product, put the accessory into the accessory case, then closed and lock the
fly-case.
5. Fly-case only up stacked two layers. Prohibited upside down
6. When packed with carton box, equipment should be put into the foam
first, then set into a carton, pay attention to the vertical position.
3.4 UNPACKING
Note: Before unpacking check the damage is whether due to the transportation or
not, if you find any such damage, please do not use this item, and contact with the
dealer or manufacturer as soon as possible.
