![background image](http://html.mh-extra.com/html/royal/r-3500tr/r-3500tr_installers-manual_1493986006.webp)
6
2
Getting
Started
Introducing the
Royal Fireplaces
Royal Fireplaces direct vent gas fireplaces are
designed to operate with all combustion air
siphoned from outside of the building and all
exhaust gases expelled to the outside.
The information contained in this
Installers Guide
,
unless noted otherwise, applies to all models and
gas control systems.
Gas fireplace diagrams, including the dimensions,
are shown in this section.
Pre-installation
Preparation
This gas fireplace and its components are tested
and safe when installed in accordance with this
Installers Guide
. Report to your dealer any parts
damaged in shipment, particularly the condition of
the glass.
Do not install any unit with damaged,
incomplete, or substitute parts.
The vent system components and trim doors are
shipped in separate packages. The gas logs are
packaged separately and must be field installed.
Read all of the instructions before starting the
installation. Follow these instructions carefully
during the installation to ensure maximum
safety and benefit. Failure to follow these
instructions will void the owners warranty and
may present a fire hazard.
The Royal Fireplaces warranty will be voided by,
and Hearth Technologies Inc. disclaims any
responsibility for, the following actions:
Installation of any damaged fireplace or vent
system component.
Modification of the fireplace or direct vent system.
Installation other than as instructed by Hearth
Technologies Inc.
Improper positioning of the gas logs or the glass
door.
Installation and/or use of any component part not
manufactured and approved by Hearth Technolo-
gies Inc. not withstanding any independent testing
laboratory or other party approval of such compo-
nent part or accessory.
ANY SUCH ACTION MAY POSSIBLY CAUSE A
FIRE HAZARD.