background image

 

THANK YOU

We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this Avondale Grove 

collection electric fireplace media mantel. We strive to continually create quality products designed to enhance your home. Visit us online 

to see our full line of products available for your home improvement needs. Thank you for choosing Home Decorators Collection!

  Model  # 258-102-170-Y 

   

 

# 258-102-165-Y 

   

 

# 258-102-48-Y

Item 

# 207000995 

   

# 207000996 

   

# 207001015

USE AND CARE GUIDE

AVONDALE GROVE COLLECTION: ELECTRIC FIREPLACE MEDIA MANTEL

Questions, problems, missing parts? Before returning to the store, 

call Home Decorators Collection Customer Service

8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 

1-800-986-3460

HOMEDEPOT.COM/HOMEDECORATORS

IMPORTANT INSTRUCTIONS

    

PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING APPLIANCE 

WARNING!

IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, AN ELECTRICAL SHOCK OR FIRE MAY RESULT

CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.

INSTALLER: Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

Summary of Contents for 207000995































Reviews: