Alpha5000ML owner’s manual 38
There are 4 types of confirmation reports:
• Dept
All the department programming. See Running the
Department Confirmation Report on page 62.
• PLUs
All PLU programming. See Running the PLU
Confirmation Report on page62.
• Clerks
All clerks. See Running the Clerk Confirmation Report on
page62.
• Options
All the parameters for setting the register, including
header, footer, scrolling messages, tax rates and so on.
See Running the Options Dump Report on page61.
Clearing an Error
The
clear
key stops an alarm beep that happened because a key was pressed
that was not correct for that operation.
The
clear
key does not erase a transaction that was registered by an operating
key and printed on the register tape.
To erase an entry after you press a key that printed the entry on the tape during a
sales transaction, use the
clear
key to correct the error and undo the last entry.
If the cash register makes a loud error beep, press the
clear
key to stop it.
If your cash register will not stop making a beeping sound after you press the
clear
key, you can do three more things.
If you input the error character, you can use the
bksp
key to clear the error input.
Half System Clear
If you pressed the
clear
key and the error beep does not stop, you can do a Half
System Clear. For more information about a Half System Clear, see Half System
Clear on page81.
Full System Clear
If you did a Half System Clear and a Partial Clear and the error beep still does not
stop, as a last resort, you can do a Full System Clear. For more information about the
Full System Clear, see Full System Clear on page 81
