Royal Alpha5000ML Instruction Manual Download Page 84

Page: 84 / 108

Alpha5000ML owner’s manual 82

Half System Clear

If you cannot get the cash register to respond, try a half system clear.

To do a half system clear

Unplug the cash register from the power source.

Wait 30 seconds.

Press

clear

key and Plug the cash register in again.

Press the

subtotal

key.

Full System Clear

If nothing else works, perform the following procedure.

Caution

This procedure resets the cash register to the factory settings. You lose all
your transaction information and programming information.

To do a full system clear

Unplug the cash register from the power source and
wait 30 Seconds.

Press

1379

and Plug in the cash register.

Press

enter

to confirm.

Continue with normal operations.

If Nothing Helps

If a problem still persists, call our Customer Service Support Line toll-free at
1-800-272-6229.

Summary of Contents for Alpha5000ML













































































































Search results

Summary of Contents for Alpha5000ML

Reviews:

Related manuals for Alpha5000ML

Brands by name

Popular brands

Royal Alpha5000ML, Instruction Manual

Search results

Summary of Contents for Alpha5000ML

Reviews:

Related manuals for Alpha5000ML

Brands by name

Popular brands