9
RVV Gen II KO Service and Parts Manual
RVV Gen II Specifications
Dimensions (280 cap.) .................72” H x 39” W x 36.5” D
Approximate Empty Weight ........720 lbs. (327 kg)
Operating Voltage ........................115 VAC, 60 Hz
Amperage Rating .........................9 Amp
Charge ..........................................8.0 oz. R134a
Construction .................................Steel cabinet, plastic
cells, glass front
Configuration
...............................40 selections (5 shelves)
IMPORTANT NOTE ON
TRANSPORTING THE RVV
Before transporting the RVV,
always ensure that the
protective transport packaging is replaced,
including:
• Packing tape to secure the case support;
• Styrofoam block on top of the motor cover, below the
elevator arm;
• Binder clips to secure each belt, placed approximately in
the middle of each belt’s run; and
• Cardboard to protect the glass.
Improper packaging before shipping could cause damage.
SECTION 1: General Information and Setup
Vender Identification
VENDER SERIAL PLATE — The vender’s main serial
plate is located on the exterior left side of the vender’s
main door and has the following information:
• Vender model code
• Vender serial number
• Amps required by the vender
• Unit charge of R134a
• Refrigeration design pressures
The vender’s model code contains useful information:
the machine type, such as RVRVV (Royal Vendors Royal
Vision Vender); the model number, such as 500; and the
number 40, which designates that the vender has forty
cells.
The vender’s serial number contains several important
pieces of information as well. The serial number currently
in use consists of the following:
• The first four numbers represent the year the vender
was produced;
• The fifth and sixth digits represent the week within that
year the vender was produced;
• The first letter represents the style of the vender;
• The second letter represents the location where the
vender was built; and
• The last five digits represent the number of that vender
built within that week.
REFRIGERATION SERIAL PLATE: The Refrigeration
Serial Plate is located on the front of the vender’s
refrigeration unit, mounted on the kick plate. It looks
similar to the Vender Serial Plate with the exception that
the model number specified is the refrigeration unit model.
There is currently one model in use:
Model
Compressor size
Usage
8000V
Super 1/3 Horsepower
All RVV