6
1.
Attach the power cable to the back of the machine, plug into an outlet, and turn the switch on.
•
The unit will conduct an automatic self-diagnostics to ensure accurate counts.
•
After three seconds of the counting wheels spinning, the screen will display “0”.
•
If there is a problem, the preset display will show an error code. (See ERROR CODE DISPLAY
AND SOLUTIONS
–
LOCATED ON PAGE 9.)
2.
Before counting, select counting settings that are related to your counting needs:
•
Auto and Manual Start Modes:
The machine is preset to automatically start counting bills
once placed into the hopper. To change to manual start mode, press the “MNL/AUTO”
button, insert the bills into the hopper, and press the “
START
” button. Press the “MNL/AUTO”
button again to return to auto mode.
•
Add Mode
: The Add mode displays the cumulative total of all bills counted. To turn the ADD
mode on, press the “ADD” button.
•
Batch Mode
: The machine is preset to common counting mode. To count bills in batches,
press the “BATCH” button. Batching is preset to 100 bills. To change the batch amount, use
the keypad to enter a batch number between 1 and 999. Press “START” to save the setting.
Press the “C” button again to clear.
•
Counterfeit Detection
: To turn on/off counterfeit
detection methods, press the “CF” button
. If
a suspicious bill is found, the machine will stop counting to allow removal and will display the
error code on the display. To resume counting, simply press “START”.
PRODUCT OPERATION
