background image

SAFETY INSTRUCTIONS

2

When using this machine follow these safety precautions to reduce risk of fire, electric shock, or injury.

WARNING

Read & 

Fully Understand This Owner’s Manual 

Before Using This Machine.

1.

Only use the power cord that comes with the machine. Plug the power cord into a properly 

grounded wall outlet.

2.

Do not use the machine if the power cord is damaged.

3.

Do not place the machine in an area where it may be exposed to water or other liquids.

4.

Do not take apart the machine. When service or repairs are needed, bring to a qualified service 

repair technician or contact Royal Sovereign Customer Service.

5.

When unplugging the power cord from the outlet, grip the plug to pull it out.

6.

Do not place objects on the power cord and do not bend it excessively.

7.

Before dusting the machine with a brush, unplug the machine from the wall. Do not use liquid 

or aerosol cleaners on the machine. Use a soft brush to avoid any paper particles or dust from 

sticking to the light transmitter or the light receiving sensors.

8.

Do not use the machine in areas of high temperature, high humidity, or strong sunlight. This 

may result in the machine not working properly.

9.

When not using the machine for long periods of time, unplug the power cord from the outlet.

10. The effective power must be in scope of 110V.

Summary of Contents for RBC-ED350













Reviews: