Royal Enfield Himalayan 2022 Owner'S Manual Download

Page: 52 / 148

OPERATION OF CONTROLS

SERVICE REMINDER



Service reminder is provided to remind about service
due.



Spanner symbol will flash till vehicle is serviced at
service center.

DO NOT use high pressure water jet directly on instrument
cluster for cleaning. Use only water spray cleaning and wipe it
with soft dry cloth.



Service reminder can be reset ONLY by authorised
personnel at service center after service is
completed.



Service reminder symbol will flash on as per below
distance input from odometer.

i )

1st service - 450 kms or 279.6 mile.

ii)

2nd service - 4900 kms or 3044.7 mile.

iii) from there on for every 5000 kms or 3106.85 mile

from previous value (ex: 9900 kms or 6151.5 mile,
14900 kms or 9258.4 mile etc.)

Royal Enﬁeld Himalayan

Summary of Contents for Himalayan 2022





















































































































































Search results

Summary of Contents for Himalayan 2022

Reviews:

Related manuals for Himalayan 2022

Brands by name

Popular brands

Royal Enfield Himalayan 2022, Owner'S Manual

Search results

Summary of Contents for Himalayan 2022

Reviews:

Related manuals for Himalayan 2022

Brands by name

Popular brands