Royal Enfield Himalayan 2022 Owner'S Manual Download

Page: 114 / 148

LONG TRIP PRECAUTIONS



Service the motorcycle at a Royal Enfield Authorised
Dealer / Service Center.



Ensure sufficient quantity of petrol in the fuel tank for the
journey planned.



Check and correct tire pressure if necessary.



Any loose fasteners.



Condition of the tires.



Correct oil level in engine.



Working of all lights and horn.

CHECK PRIOR TO THE COMMENCEMENT
OF LONG JOURNEY

LONG TRIP PRECAUTIONS

CHECK AFTER EVERY 1500 KMS /
932 MILES OF RUN



Proper drive chain tension.



Tool kit



Bulbs for Head light, Trafficator light & Taillight, fuse



Accelerator, Clutch cables.



Rear chain master link lock assembly.



Insulation tape.



Spark plug, Spark plug cap.

ITEMS TO BE CARRIER

Royal Enﬁeld Himalayan

112

Summary of Contents for Himalayan 2022





















































































































































Search results

Summary of Contents for Himalayan 2022

Reviews:

Related manuals for Himalayan 2022

Brands by name

Popular brands

Royal Enfield Himalayan 2022, Owner'S Manual

Search results

Summary of Contents for Himalayan 2022

Reviews:

Related manuals for Himalayan 2022

Brands by name

Popular brands