Royal Enfield Himalayan 2022, Owner'S Manual

Page: 77 / 148

WARNING INDICATIONS & SAFETY SYSTEMS
An ABS indicator lamp is provided in
the console (as shown in adjacent
image) to warn the rider in the event
of any malfunction of the ABS.
When the ignition and kill switch are
switched ‘ON’ the ABS sign light up
and remain ‘ON’ till the motorcycle
attains a speed of 5 kmph (3MPH) and switch ‘OFF’. This
indicates the ABS is working properly. In the event the lamp
does not switch ‘OFF” and remains continuously ‘ON’ at higher
speeds, it is recommended not to drive the motorcycle and get
the brake system inspected and corrected through a nearest
authorized Royal Enfield Distributor. Failure to do so can result
in a serious injuries and loss of life.
In the event of motorcycle falling over on either of its sides with
the engine running and the gears engaged the Roll over sensor
will “disable” both the ignition and fuel systems and switch
“OFF” the engine. This is to prevent any damage to the
motorcycle and its rider. To reset the Roll over sensor and
reactivate the ignition and fuel systems.
 Ensure the motorcycle is made upright and is on its
center stand.
 Ensure gears are in correct neutral and the neutral lamp
is glowing in the instrument console.
 Switch “OFF both ignition & stop switches, wait for a few
seconds and switch “ON” the Ignition and stop switch
again, to start the engine.
3. ROLL OVER SENSOR
Royal Enfield Himalayan
75