Royal Enfield Himalayan 2022 Owner'S Manual Download

Page: 50 / 148

OPERATION OF CONTROLS

I. ABS SWITCH - ACTIVATION PROCEDURE

Ignition switch “ON”
condition

Vehicle stationary

Press ABS switch for (3-
5 secs)

Single  channel  ABS  mode  is
activated  (if,  enabled)  :  Rear
ABS  function  will  not  work,
Front wheel ABS will only work.

Procedure to reset to Dual channel :

Ignition switch reset*,

vehicle will return to default dual channel ABS mode.

CAUTION

Dual Channel ABS mode (Default) : ABS will work on both
wheels.

*Ignition key Reset :

Turning ignition switch from “OFF” to

“ON”.

If Single channel ABS mode enabled, ABS only controls the
front wheel. The rear wheel is not controlled by ABS and may
lock during braking maneuvers.

Royal Enﬁeld Himalayan

Summary of Contents for Himalayan 2022





















































































































































Search results

Summary of Contents for Himalayan 2022

Reviews:

Related manuals for Himalayan 2022

Brands by name

Popular brands

Royal Enfield Himalayan 2022, Owner'S Manual

Search results

Summary of Contents for Himalayan 2022

Reviews:

Related manuals for Himalayan 2022

Brands by name

Popular brands