Royal Catering RCPBG 16H, User Manual

Page: 22 / 107

e) If using the device in a damp environment cannot be avoided, a residual
current device (RCD) should be applied. The use of an RCD reduces the risk of
electric shock.
f) Do not use the device if the power cord is damaged or shows obvious signs of
wear. A damaged power cord should be replaced by a qualified electrician or
the manufacturer‘s service centre.
g) To avoid electric shock, do not immerse the cord, plug or device in water or
other liquids. Do not use the device on wet surfaces.
h) ATTENTION! DANGER TO LIFE! While cleaning, never immerse the device in
water or other liquids.
i) Do not use in very humid environments or in the direct vicinity of water tanks.
j) Prevent the device from getting wet. Risk of electric shock!
k) The connection of devices requiring the 400V current should be done by a
qualified electrician.
l) Adequate overload protection of the electrical installation must be provided.
2.2. Safety in the workplace
a) Make sure the workplace is clean and well lit. A messy or poorly lit workplace
may lead to accidents. Try to think ahead, observe what is going on and use
common sense when working with the device.
b) Do not use the device in a potentially explosive environment, for example in
the presence of flammable liquids, gases or dust.
c) If you discover damage or irregular operation, immediately switch the device
off and report it to a supervisor without delay.
d) If there are any doubts as to the correct operation of the device, contact the
manufacturer's support service.
e) Only the manufacturer's service point may repair the device. Do not attempt
any repairs independently!
f) In case of fire, use a powder or carbon dioxide (CO2) fire extinguisher (one
intended for use on live electrical devices) to put it out.
g) Children or unauthorised persons are forbidden to enter a work station. (A
distraction may result in loss of control over the device).
h) Use the device in a well-ventilated space.
i) Please keep this manual available for future reference. If this device is passed
on to a third party, the manual must be passed on with it.
j) Keep packaging elements and small assembly parts in a place not available to
children.
k) Keep the device away from children and animals.
l) If this device is used together with another equipment, the remaining
instructions for use shall also be followed.