Roxio DVDit Pro HD, User Manual

Page: 38 / 222

Chapter 3 Creating projects
38
To add copy protection to the project:
1. Choose File > Project Settings. The Project Settings dialog box opens.
2. Click the Protection tab.
3. Select the Enable Copy Protection option.
4. To use CGMS, select an option from the CGMS pop-up menu:
- Unlimited Copies: Provides no copy protection.
- One Copy Allowed: Permits any number of copies to be made from the original
disc. The copies, however, cannot be copied again to create second-generation
discs.
- No Copies Allowed: Permits no copying.
5. To use CSS, select No Copies Allowed from the CGMS pop-up menu, then select the
Format for CSS option.
6. To use Macrovision, select No Copies Allowed from the CGMS pop-up menu, then
select an option from the Macrovision pop-up menu:
- Off: Provides no copy protection.
- Type 1: Prevents copying to analog videotape by using Automatic Gain Control
(AGC). AGC confuses the video recorder by sending it a video signal that is
stronger than it actually is, thereby creating a copy with very low levels and
degraded quality. This option is compatible with both PAL and NTSC projects.
- Type 2: Imposes two-line color stripes on the recorded video signal in addition to
using AGC. This option is only compatible with NTSC projects.
- Type 3: Imposes four-line color stripes on the recorded video signal in addition to
using AGC. This option is only compatible with NTSC projects.
7. Click OK.
n
If you use copy protection, you cannot burn discs or write to disc images, and you cannot
select the OpenDVD option.
DVDit_Pro_HD.book Page 38 Monday, September 25, 2006 2:32 PM