Roxio DVDit Pro HD, User Manual

Page: 149 / 222

Chapter 10
Finishing the project
When you are satisfied with your project, you are ready to burn it to disc, or write it to a
DLT to send to a replicator.
DVDit Pro HD also lets you create a DVD Volume or disc image to test that the project will
burn correctly. If DVDit Pro HD can create a DVD Volume or disc image successfully, you
can then burn discs/write DLTs from the DVD Volume or disc image. It’s also a good idea
to create a DVD Volume or disc image if you plan to create more copies in the future;
burning/writing from a volume or disc image is quicker than from a project, especially if the
project contains non-compliant video or motion menus.
After you create a disc or DVD Volume, you might want to update it by adding, removing,
or changing content. If you created an OpenDVD disc/volume, you can open and edit it just
like the original project.
This section includes:
• “Removing unwanted material from projects” on page 150
• “Burning discs” on page 150
• “Writing Volumes” on page 152
• “Writing disc images” on page 153
• “Editing an OpenDVD disc or DVD Volume” on page 154
• “Writing to a Master” on page 156
DVDit_Pro_HD.book Page 149 Monday, September 25, 2006 2:32 PM