Roxio DVDit Pro HD, User Manual

Page: 156 / 222

Chapter 10 Finishing the project
156
Writing to a Master
DVDit Pro HD lets you create a DLT (DVD) or CMF (Blu-ray) master of your project to
send to a replicator. Most replicators require DLTs for DVD disc replication (although some
now accept recordable DVDs). At this time, it is anticipated that all Blu-ray replicators will
require a CMF.
You can write DLTs from the current project, or from a DVD Volume or disc image file.
You can write CMFs from the current project.
In addition to the data that will go on the disc, a Master contains a disc descriptor protocol
(DDP) report that contains information about the disc. You can save a copy of this report on
your PC.
Before writing a Master, make sure you enter the mastering information in the Project
Settings dialog box. See
“Adding mastering information (DVD only)” on page 35 for
details.
To write a DLT:
1. Chose File > Save to save the project.
2. Insert a tape in the DLT drive.
3. Choose Burn > Write Master. The Write Master dialog box opens.
DVDit_Pro_HD.book Page 156 Monday, September 25, 2006 2:32 PM