Rottler HP6A, Operation And Maintenance Manual

Page: 130 / 150

Material Data Safety Sheets 8-10 HP6A Manual
SECTION 4 FIRST AID MEASURES
INHALATION
Remove from further exposure. For those providing assistance, avoid exposure to yourself or
others. Use adequate respiratory protection. If respiratory irritation, dizziness, nausea, or
unconsciousness occurs, seek immediate medical assistance. If breathing has stopped, assist
ventilation with a mechanical device or use mouth-to-mouth resuscitation.
SKIN CONTACT
Wash contact areas with soap and water. If product is injected into or under the skin, or into any
part of the body, regardless of the appearance of the wound or its size, the individual should be
evaluated immediately by a physician as a surgical emergency. Even though initial symptoms
from high pressure injection may be minimal or absent, early surgical treatment within the first few
hours may significantly reduce the ultimate extent of injury.
EYE CONTACT
Flush thoroughly with water. If irritation occurs, get medical assistance.
INGESTION
First aid is normally not required. Seek medical attention if discomfort occurs.
SECTION 5 FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA
Appropriate Extinguishing Media: Use water fog, foam, dry chemical or carbon dioxide
(CO2) to extinguish flames.
Inappropriate Extinguishing Media: Straight Streams of Water
FIRE FIGHTING
Fire Fighting Instructions: Evacuate area. Prevent runoff from fire control or dilution from
entering streams, sewers, or drinking water supply. Firefighters should use standard protective
equipment and in enclosed spaces, self-contained breathing apparatus (SCBA). Use water spray
to cool fire exposed surfaces and to protect personnel.
Hazardous Combustion Products:
Aldehydes, Oxides of carbon, Sulfur oxides, Smoke,
Fume, Incomplete combustion products
FLAMMABILITY PROPERTIES
Flash Point [Method]: >223C (433F) [ ASTM D-92]
Flammable Limits (Approximate volume % in air):
LEL: 0.9 UEL: 7.0
Autoignition Temperature: N/D