Title Here
22
Installation & Setup Guide
Align Coupling - Adjust Stop Bolts
It is now possible to operate the actuator using the Enlight
program.
Moving the position control slider will rotate the output
shaft to enable alignment of the drive bush to the valve
stem and adjustment of the STOP bolts. Coarse control will
allow full travel of the actuator. Fine control is used for small
adjustments of the actuator Output shaft.
Incrementing the position slider using the arrows
will vary position by 1% for coarse and 0.1% for
fine control.
When the position control is operated for the first time a
warning will appear to indicate that the actuator will be taken
offline and will not respond to remote control commands.
CAUTION
The actuator will move to the indicated position on the
Position Control Slider.
Select OK
Click on the ‘OK’ button, the actuator will be taken offline
and will now move to the position as indicated on the position
control slider.
The actuator is now unavailable for remote control.
Adjust Actuator Stop Bolts
Refer to the stop bolt adjustment procedure. Use the Fine and
Coarse position slider to position the actuator during the stop
bolt adjustment procedure.
Fig. 24.1
Summary of Contents for CVQ 1200
Page 2: ...2...
