18
Installation & Setup Guide
Commissioning
Move the actuator selector knob to the ’STOP’
position.
Apply Electrical Power
On completion of the correct assembly and electrical
connection procedures, the electrical power supply can now
be applied to the actuator.
NOTE: If the unit is fitted with failsafe capacitors the
Green or Red LED (depending on Mode selected ) on
the selector will flash until the capacitors are fully
charged.
Movement is not possible whilst the LED is flashing.
Establish Bluetooth
TM
Communications
It is now required to establish communications in order to
complete the fitting procedure.
Ensure Bluetooth is enabled on the PDA then click on the
Enlight Icon to start the program.
The maximum range of Bluetooth communication is
10 Meters.
The first screen gives the option to connect to an actuator or
open a saved file.
WORK OFF LINE
If there is a configuration file stored in the PDA it can be
opened to review files.
RECONNECT AN ACTUATOR
If a link between the PDA and actuator has previously been
established a list will appear and a search for new devices will
not occur.
DISCOVER A NEW ACTUATOR
The PDA will search a radius of 10 meters for CVA actuators.
QUIT
Exit the menu.
Fig. 20.1
Fig. 20.2
Fig. 20.3
Summary of Contents for CVQ 1200
Page 2: ...2...
