21. When using a unit, a minimum 20% of tractor and equipment weight must be on
tractor front wheels. Without this weight, tractor could tip over, causing personal
injury or death. The weight may be attained with a front end loader, front wheel
weights, ballast in tires or front tractor weights. When attaining a minimum 20%
of tractor and equipment weight on the front wheels, you must not exceed the
ROPS weight certification. Weigh the tractor and equipment. Do not guess or
estimate!
22. Inspect the entire machine periodically
4
. Look for loose fasteners, worn or broken
parts, and leaky or loose fittings.
23. Use only the driveline supplied with the mower. Do not use it if it is missing any
shield or safety protection.
24. Pass diagonally through sharp dips and avoid sharp drops to prevent "hanging
up" tractor and mower.
25. Avoid sudden starts and stops while travelling up or downhill.
26. Always cut down slopes; never across the face. Avoid operation on steep slopes.
Slow down on sharp turns and slopes to prevent tipping and or loss of control.
3.02 - Setup
Notice to dealer:
pre-delivery setup and service including lubrication is the responsibil-
ity of the authorised dealer. It is up to him to assure that the machine is in perfect condi-
tion and ready to be used. It is his responsibility to ensure that the customer is aware of
all safety aspects and operational procedures for the mower. He must also fill out the
Pre-delivery checklist
5
prior to delivering the mower.
OPERATOR'S MANUAL
CYCLONE 'C50'
ROTOMEC
12
GENERAL INFORMATION
5
See chapter 7 - Pre-delivery Checklist.
4
See chapter 4 - Maintenance.
Fig. 3
Rear discharge C50
mower, front mounted.