Calibrating the master fingerprint
LED
Last process
INFO
During the calibration process, if a finger has been moved over the sensor and not accepted as the master
fingerprint, the green and red LEDs will remain lit.
Repeat the calibration process.
Once the master fingerprint(s) is / are calibrated, the device is ready for operation.
The blue LED will light up.
Calibrate the user fingerprints via the BioKey
®
app.
8.3.5 Calibrating user fingerprints
INFO
Wash your hands before calibrating master / user fingerprints.
The BioKey
®
app is installed on the mobile device.
Calibrating user fingerprints
LED
Open the BioKey
®
app.
Activate Bluetooth.
Move the master finger over the sensor.
Click on the BioKey
®
app and select a device.
Select
User
in the menu.
Add a user (
+
) and assign a name.
Add fingerprint.
Select relay 1.
Calibrating user fingerprints
Calibrate the same fingerprint eight times.
LED lights up green: OK
LED lights up red: repeat the process.
INFO
Master fingerprints can also be calibrated via the BioKey
®
app.
To do so, first move the slider to the master user.
Only the first master fingerprint is active.
Commissioning and operation
Finger scan with app
Calibrating user fingerprints
76 ·
05 / 2020
·
IMO_438_EN_v3
Roto Safe E Eneo C | CC | CF
Subject to change.
