Connector / cable assignment
White: IN1 / input 1 (OPEN)
Brown: +24 V
Green: GND
Yellow: IN2 / input 2 (day / night changeover switch)
Grey:
K1a pot.-free contact
Pink:
K1b pot.-free contact
INFO
The yellow wire must remain unassigned; otherwise this will bridge the switch on the leaf. Terminals 5 and
6 are connected to one another internally via a relay and a 47 ohm resistor. The maximum load of the
contacts is 24 V / 40 mA
Finger scan cable assignment (between JST connector and Black Box)
Brown: +24 V
Yellow: GND
Green: control system (OPEN)
6.4 Cable routing
Cable – type E
Inside
Outside
4
5
1
2
3
Connection diagram
Cable routing
Subject to change.
Roto Safe E Eneo C | CC | CF
IMO_438_EN_v3
·
05 / 2020
· 63
