Roto DUO, Mounting Instructions

Page: 5 / 30

3
!
General safety instructions
• Read this manual carefully before installing and operating
the device and follow all instructions.
• Ensure that this manual is accessible to all users.
• Keep this manual in a safe place until you dispose of the
product.
• If the product changes hands, pass this manual on to the
new owner.
Intended use
The manual pleated blind / duo is intended for inside installa-
tion and protects against heat and sunlight.
It may only be installed and used on the Roto skylight types
designed for their use.
The manual pleated blind / duo reflects and absorbs a large
portion of solar radiation, but does not offer full protection
against sunlight and heat (in a physical sense).
Unpacking/checking the scope of delivery
(Fig. A1)
⚠
Risk of suffocation!
Plastic parts, polystyrene, screws, small parts,
etc., can be very dangerous for children to play
with.
> Do not leave the packaging material and installation
parts lying around, and keep away from children and
toddlers.
> Keep children away from the installation site throug-
hout the installation procedure.
• Please dispose of the packaging material (cardboard, poly-
styrene, plastic bag) according to local regulations.
• When unpacking and installing the device, work with clean
hands or with gloves to avoid soiling the product.
• Please check the scope of delivery. If parts are missing, con-
sult a dealer.
Preparing tools/aids
(Fig. A2)
• Pencil
• Cross-head screwdriver, PZ1
• Yardstick/tape measure
• If needed: stable climbing equipment (step ladder)
Installation
(Fig. 1-4)
⚠
Risk of falling!
> Only use climbing equipment that is resting on a solid
foundation and that offers good support and high car-
rying capacity!
> Do not lean out of the skylight.
⚠
Risk of injury from falling components!
> To mount the product, only use fixing materials that
were included in the delivery and that are suitable for
the window frame material.
> Never place tools, components and fixing materials on
the climbing equipment.
> Keep children away from the installation site throug-
hout the installation procedure.
Settings
(no figure)
Settings are not required after installation.
Operation
Open and close the pleated blind
(no figure)
• Hold the pleated blind at the centre of the handle and slide it
to the desired position.
It stops in any position.
Care and maintenance
Care
(no figure)
To ensure a long life, we recommend cleaning the aluminium
surface of the pleated blind at least once a year.
• Wipe the aluminium surface with a moist cloth only.
• Carefully brush off the blind.
Spare parts, wear parts, repair
(Fig. A1)
> Only use original spare and wear parts from the manu-
facturer.
> The blind should only be repaired by a blinds specialist.
Dismantling and disposal
(Fig. B1)
Used pleated blinds or components should not be discarded
with the household waste.
• Please dispose of the parts as required by local regulations.
English