Roto-Mix Hay Pro 533-16, Operation And Parts Manual

Page: 15 / 57

Page 15
Adjust drawbar length:
PTO SPEED
540 RPM - DIMENSION (A) 14” (356 mm)
1000RPM l6” (406mm)
ADJUST TRAILER HITCH CLEVIS
Mixer should be approximately level when
attached to tractor.
Adjust clevis by changing hole location on trailer
tongue.
PRE OPERATION CHECK LIST
1. Carefully study and understand this manual.
2. Do not wear loose-fitting clothing, which may catch in moving parts.
3. Always wear protective clothing and substantial shoes.
4. Keep wheel lug nuts or bolts tightened to specified torque.
5. Assure that agricultural implement tires are inflated evenly.
6. Give the unit a visual inspection for any loose bolts, worn parts or cracked welds, and make
necessary repairs. Follow the maintenance safety instructions included in this manual.
7. Check to see that no obstructions are present in the mixer prior to start up.
8. Be sure that there are no tools lying on or in the mixer/feeder.
9. Do not use the unit until you are sure that the area is clear, especially children and animals.
10. Because it is possible that this mixer/feeder maybe used in dry areas or the presence of
combustibles, special precautions should betaken to prevent fires and fire fighting equipment
should be readily available.
11. Don’t hurry the learning process or take the unit for granted. Ease into it and become familiar
with your new mixer/feeder.
12. Practice operation of your mixer/feeder and its attachments. Completely familiarize yourself
and other operators with its operation before using.
13. Securely attach to towing unit. Use a high strength, appropriately sized hitch pin with a
mechanical retainer.
14. Do not allow anyone to stand between the tongue or hitch and the towing vehicle when
backing up to the mixer/feeder.
TRACTOR HYDRAULIC SYSTEM RECOMMENDATIONS
10 GPM Minimum 15 GPM Maximum
1200 to 1600 PSI Operating Range
Hydraulic system should be self purging.